Ductless Mini Split Service in Studio City: Install, Repair, Maintain
Room additions, detached structures, and homes without ductwork are exactly what mini splits are built for. We handle installation and ongoing service.
Request Service Online
Send the form. Then our Studio City office returns the call inside half an hour.
What's Included
Ductless suits additions, ADUs, and older homes south of Ventura where new ductwork means opening ceilings. We plan where each indoor head goes, size each zone, and route the line set to one quiet outdoor unit.
Why Choose Studio AC Co.?
Experienced Technicians
Every visit is handled by an experienced HVAC tech
Same-Day Service
Quick response for urgent needs
Upfront Pricing
No hidden fees or surprise charges
System Tested With You
We run the system and walk you through the work
Ductless Mini Split Installation in Studio City: Cooling Without a Duct Chase
Mini splits fit the houses where a big cabinet and a trunk line do not. That covers hillside homes up the canyon roads, rear additions, converted garages and rooms that never got proper airflow. Studio AC Co. installs ductless systems in Studio City for homeowners who are ready to book.
One outdoor compressor, one to four indoor heads, and a thin line set between them. We lay out where each head goes before we quote, so you know what the walls and the exterior will look like.
On a hillside lot, the outdoor unit can sit on a bracket or a small pad instead of a full deck, and the thin line set avoids cutting through finished ceilings. That keeps the work contained, and it keeps the rest of the house usable while we install.
What sets the price of a mini split job
Single-zone systems start around $3,600 installed for a 12,000 BTU indoor head and outdoor compressor. Multi-zone setups, two to four indoor heads sharing one outdoor unit, run $12,000 to $24,000. Where your job lands depends on the items below, and the written quote itemizes each one so you can see what you are paying for.
| Item | What moves it |
|---|---|
| Zones | Each indoor head adds equipment and labor, and the outdoor unit must be sized for the total. |
| Capacity | Larger rooms and more glass need bigger heads. |
| Line set length | Longer runs between the outdoor unit and each head cost more and need careful routing. |
| Wall penetrations | Stucco, masonry or finished interiors take more work than a simple frame wall. |
| Electrical | A dedicated circuit and disconnect may need to be added. |
| Line set concealment | Burying or covering the line set to suit the look of the house adds labor. |
| Heat pump option | A heat pump model also heats the room, which changes the equipment you choose. |
What the install visit covers
On the day, the crew works room by room so you can still use the rest of the house.
- Mount the indoor heads at the heights we agreed on.
- Core the wall and run the line set, drain and wiring.
- Set the outdoor unit on a pad, bracket or deck.
- Evacuate and charge the system, then test every head.
- Show you the remote, the schedule and the filter access.
Equipment, permits and power
We install Daikin and Mitsubishi ductless equipment. Efficiency is rated in SEER2 and HSPF2, and a heat pump model heats as well as cools, so one system can cover both seasons.
Before we order anything, you approve the head locations, the line set route and the outdoor unit position on the written quote. That keeps the install day short and the surprises out of it.
Mini split installs are permitted work. In Studio City the permit comes from LADBS, electric is LADWP and gas is SoCalGas. If your project also touches ductwork, Title 24 Part 6 can require duct testing depending on the scope.
Plan your ductless install
Send us the rooms you have in mind and we will return a written quote with the number of heads and where they go. Call (877) 704-7652 to book the visit.
Call (877) 704-7652Ductless Mini Split by city
Open a city-specific page when you want this service tied to local neighborhoods, ZIP coverage, and the housing notes that shape the visit scope.
CA
Ductless Mini Split in Studio City
Studio City runs from flat streets of ranch homes up into the hills off Laurel Canyon, where contemporary houses stack their living space and leave the condenser on a lower deck or a benched pad with genuine vertical lift back to the air handler. The hillside roads are narrow enough to limit what can be delivered in one piece, so equipment gets staged in sections and slim ducted or mini split options often win over a large cabinet that cannot make the turn onto the property.
View local serviceCA
Ductless Mini Split in Sherman Oaks
Sherman Oaks splits between valley floor ranch homes with attic ductwork and hillside estates stepping up toward the ridge, where the condenser has to sit on a cut pad or a lower deck with a long lifted line set. Contemporary rebuilds add glass and open volume the original system was never sized for, so a fresh load calculation and zoning make more difference here than simply adding tonnage.
View local serviceRelated Services
AC Installation
We size each new AC from a room-by-room load calculation, not the old unit's label, then set it on a flat Studio City lot or a hillside pad.
Learn More →AC Repair
When an older system fails, we fix what is worth fixing and say plainly when a replacement makes more sense for the house.
Learn More →AC Maintenance
A new system's first tune-ups shape how long it lasts. We check charge, airflow, and drain lines on systems we installed and ones we did not.
Learn More →Pricing and Booking Guides
AC Installation Cost in Studio City: Plan It Before Summer
AC installation cost in Studio City depends on the house, not a flat rate. Here is what moves the price and why spring is the time to plan.
CoolingAC Installation Near Me in Studio City: Book the Survey, Set the Date
A local crew, a measured house and a written quote. This is how an AC installation in Studio City gets booked, from the first call to install day.